GMD118-1 Greenmaster Motor - GMD 82-05-1B - gmd82-05-2b - GMD82-04-1B - GMD82-04-2B - GMD95-06-1B - GM25110 | COMPATIBLE MOTOR

Special Price £144.99 Regular Price £300.00
In stock
SKU
X3-MT-180-LM-8.2-CON-FASCE-8-10-5
Replacement DC motor, suitable for home use, compatible with Greenmaster Industrial Corporation motors.
Rated V = between 180 and 230V.
Motor diameter of 3,2 in = 8,2 cm.
Rated RPM= between 4000 and 5600 RPM.
Please note that fixing holes may differ from your motor. If so, please adjust fixing plate or use jubilee clips for fixing.

Note:
Original motor manufacturer is out of business, only compatible motors from different manufacturers are available.
Replacement motor for treadmill
Suitable for home fitness equipment.



This motor is suitable to replace engines with specifications:

V: 180 to 230V.

HP : between 1.25 and 2.0.

Motor body diameter 8.2 cm.

Motor RPM: between 4000 RPM and 5600 RPM.



Installation

1. Check for proper lubrication of the running belt

2. Check the correct tensioning of the drive belt and running belt

3. Remove the old motor Connect the new motor (Faston M + corresponds to the red wire M- corresponds to the black wire)



After installation, follow the instructions below to maximise motor life and avoid premature breakage.

1. Regularly lubricate the running deck

2. Always start with your feet on the side rails (FIRST start the belt at 1km/h)

3. Keep a walking speed over 5km/h After training, check if the motor overheats .

4. If the motor reaches 45 ° C verify the correct installation and maintenance.


Special Cases

1. If the motor board does not have a speed sensor, it is necessary to calibrate the new engine. Please proceed by turning the speed trimmer of 1/4 turn at a time

2. If the mounting holes do not match those on the treadmill, you can alternatively drill the treadmill bracket so that the holes match those on the engine or fix the engine with jubilee clips / metal bands (supplied together with the motor for easier installation).

3. If the engine touches the motor housing plastic cover, position spacer washers (available from hardware stores) under the motor hood to keep it slightly raised.
© 2014- Salesource Limited. All Rights Reserved

All other trade-marks, service marks, registered trade-marks, or registered service marks mentioned in this Website are the property of their respective owners.

Contacts
Contact us by email and we will reply within 48 hours.
Sales: [email protected]

Company details: Salesource Limited, registered in England.
Registered address: 85 Great Portland Street, London, W1W 7LT, United Kingdom
Registration no. 08901785
Our official partner for on-site service in the UK is "The Treadmill Engineer".
Sales in the EU are managed by GP Services Limited, Malta, European Union.

All pictures shown are for illustrative purpose only and are meant for you to identify the spare part you need easily. Actual product may vary due to product enhancement. If not expressly stated otherwise, the shapes, sizes, specifications may be different. Our technicians have validated the compatibility of each item with the original spare part for all the items on the store.


This Website is safe. Start SSL certificate installed.
certificato SSL Ricambi Tapis Roulant